This 5-day course is designed to provide network engineers and technicians with the knowledge and skills required to implement and support a provider network (P-network).
The course focuses on using Cisco switches and routers that are connected in LANs and WANs and that are typically found in the P-network. Upon completing this course, learners will be able to configure, verify, and troubleshoot the various Cisco networking devices.
The course also includes classroom activities with remote labs that are useful to gain practical skills on deploying Cisco IOS/IOS XE Software and Cisco IOS XR Software features to operate and support the P-network.
Network Engineers operating in a Service Provider environment and individuals looking to achieve the Cisco Certified Network Associate SP Certification.
After you complete this course you will be able to:
Describe the Cisco IP NGN Architecture
Expand a small, switched LAN to a medium-sized LAN with multiple switches, supporting VLANs, trunking and Spanning Tree Protocol
Describe routing concepts as they apply to a P-network and discuss considerations when implementing routing on the network
Implement internal and external routing protocols: OSPF, IS-IS, and BGP
Describe and implement basic MPLS
Determine how to apply ACLs that are based on network requirements, and implement ACLs on a P-network
Describe when to use NAT and implement NAT on Cisco routers
Describe basic IPv6 concepts and use different configuration scenarios to implement IPv6
Describe the fundamentals of Cisco IOS XR technology
Attendees should meet the following prerequisites:
Basic knowledge of networking concepts
Basic knowledge of Cisco IOS/IOS XE and Cisco IOS XR software configuration
Skills and knowledge that are equivalent to those learned in the Building Cisco Service Provider Next-Generation Networks, Part 1 (SPNGN1) course
Service Provider Network Architecture
Introduction to Service Providers
Cisco IP NGN Architecture
Advanced LAN Switching
Implementing VLANs and Trunks
Spanning Tree Protocol Enhancements
Routing Between VLANs
First Hop Redundancy Protocols
Internal Service Provider Traffic Forwarding
Link-State Routing Protocols
Implementing Route Redistribution
External Service Provider Routing
Understanding BGP Path Attributes
Establishing BGP Sessions
Processing BGP Routes
Configuring Basic BGP
ACLs and IP Address Translation
Implementing Access Control Lists
Transitioning to IPv6
Service Provider Platforms
Describing Cisco Hardware Platform Placement
Describing Cisco IOS XR Software Architecture and Features
Explaining Software Maintenance Operations on Cisco IOS XR and Cisco IOS XE
Explaining Configuration Management with Cisco IOS XR Software
Hardware Lab 1: Configure Advanced Switching
Hardware Lab 2: Configure Inter-VLAN Routing and Gateway Redundancy
If you need training for 3 or more people, you should ask us about onsite training. Putting aside the obvious location benefit, content can be customised to better meet your business objectives and more can be covered than in a public classroom. It's a cost effective option.
Submit an enquiry from any page on this site, and let us know you are interested in the requirements box, or simply mention it when we contact you.
ITILv3, RESILIA, PRINCE2, PRINCE2 Agile, AgileSHIFT, MSP, M_o_R, P3M3, P3O, MoP, MoV courses on this page are offered by QA Affiliate of AXELOS Limited. ITIL, RESILIA, PRINCE2, PRINCE2 Agile, AgileSHIFT, MSP, M_o_R, P3M3, P3O,MoP, MoV are registered trademarks of AXELOS Limited. All rights reserved.