Interconnecting Cisco Networking Devices Part 1

Duration: 
4 days
Versions: 
1

Overview

  • The Interconnecting Cisco Networking Devices, Part 2 (ICND2) v3.0 course provides network administrators with the knowledge and skills needed to install, configure, operate, and troubleshoot a small enterprise network. Key additions to this latest revision include; understanding of Quality of Service (QoS) elements and their applicability, how virtualized and cloud services will interact and impact enterprise networks, along with an overview of network programmability and the related controller types and tools that are available to support software defined network architectures.
  • A full suite of labs have been developed using the virtual IOS environment with flexible topologies that reinforce concepts with hands-on, guided discovery and challenge labs that align to each lesson module.
  • Please note - the exam is not included in the cost of the course, but is available to book separately.
  • New Exam: 200-105
  • Who should attend
  • Individuals seeking the Cisco CCNA Routing and Switching certification.
  • The course is also appropriate for pre- and post-sales network engineers involved in the installation and support of enterprise branch office networks.
  • Key Job Tasks:
  • Configure: Implement the identified solution by applying the planned implementation processes, using Cisco IOS Software commands and applications in the correct order to the selected devices and portions of the network.
  • Verify: Use the appropriate show and debug commands and applications to ensure that the solution was correctly implemented and is performing as desired.
  • Troubleshoot: Use the appropriate show and debug commands and applications to identify the cause of basic-level network issues and correctly implement a solution that ensures that the network is performing as desired.
  • Job roles:
  • Entry-level network engineer, network administrator, network support technician, or help desk technician.
  • We strongly recommend that other students start with ICND1.
  • Certifications
  • This course is part of the following Certifications:
  • Cisco Certified Network Associate Routing and Switching (CCNA)

Skills Gained

Upon completing this course, the learner will be able to meet these overall objectives:

  • Operate a medium-sized LAN with multiple switches, supporting VLANs, trunking, and spanning tree
  • Troubleshoot IP connectivity
  • Describe how to configure and troubleshoot EIGRP in an IPv4 environment, and configure EIGRP for IPv6
  • Configure and troubleshoot OSPF in an IPv4 environment and configure OSPF for IPv6
  • Define characteristics, functions, and components of a WAN
  • Describe how device management can be implemented using the traditional and intelligent ways.

Prerequisites

The knowledge and skills that a learner must have before attending this course are as follows:

  • Understand network fundamentals
  • Implement local area networks
  • Implement Internet connectivity
  • Manage network devices
  • Secure network devices
  • Implement basic IPv6 connectivity

These skills can be acquired by attending the Interconnecting Cisco Network Devices Part 1 Version 3.0 (CICND1) course.

Course Outline

Module 1: Implementing Scalable Medium-Sized Networks

  • Lesson 1: Troubleshooting VLAN Connectivity
  • Lesson 2: Building Redundant Switched Topologies
  • Lesson 3: Improving Redundant Switched Topologies with EtherChannel
  • Lesson 4: Understanding Layer 3 Redundancy

Module 2: Troubleshooting Basic Connectivity

  • Lesson 1: Troubleshooting IPv4 Network Connectivity
  • Lesson 2: Troubleshooting IPv6 Network Connectivity

Module 3: Implementing an EIGRP-Based Solution

  • Lesson 1: Implementing EIGRP
  • Lesson 2: Implementing EIGRP for IPv6
  • Lesson 3: Troubleshooting EIGRP

Module 4: Summary Challenge

  • Lesson 1: Implementing and Troubleshooting Scalable Medium-Sized Network -1
  • Lesson 2: Implementing and Troubleshooting Scalable Medium-Sized Network -2

Module 5: Implement a Scalable OSPF-Based Solution

  • Lesson 1: Understanding OSPF
  • Lesson 2: Implementing Multiarea OSPF IPv4
  • Lesson 3: Implementing OSPFv3 for IPv6
  • Lesson 4: Troubleshooting Multiarea OSPF

Module 6: Wide-Area Networks

  • Lesson 1: Understanding WAN Technologies
  • Lesson 2: Understanding Point-to-Point Protocols
  • Lesson 3: Configuring GRE Tunnels
  • Lesson 4: Configuring Single-Homed EBGP

Module 7: Network Device Management

  • Lesson 1: Implementing Basic Network Device Management and Security
  • Lesson 2: Evolution of Intelligent Networks
  • Lesson 3: Introducing QoS

Module 8: Summary Challenge

  • Lesson 1: Implementing and Troubleshooting Scalable Multiarea Network -1
  • Lesson 2: Implementing and Troubleshooting Scalable Multiarea Network -2

Labs:

  • Troubleshoot VLANs and Trunks
  • Configure Root Bridge and Analyze STP Topology
  • Troubleshoot STP Issues
  • Building Redundant Switched Topologies
  • Configure and Verify EtherChannel
  • Improving Redundant Switched Topologies with EtherChannel
  • Configure and Verify HSRP
  • Troubleshoot HSRP
  • Implementing and Troubleshooting HSRP
  • Configure and Verify IPv4 Extended Access Lists
  • Troubleshoot IPv4 Network Connectivity
  • Troubleshooting IPv4 Connectivity
  • Configure and Verify IPv6 Extended Access Lists
  • Troubleshoot IPv6 Network Connectivity
  • Troubleshooting IPv6 Connectivity
  • Configure and Verify EIGRP
  • Implementing EIGRP
  • Configure and Verify EIGRP for IPv6
  • Configure and Verify Single-Area OSPF
  • Configure and Verify Multiarea OSPF
  • Implementing Multiarea OSPF
  • Configure and Verify OSPFv3
  • Implementing OSPFv3 for IPv6
  • Troubleshoot Multiarea OSPF
  • Troubleshooting OSPF
  • Configure Serial Interface and PPP
  • Configure and Verify MLP
  • Configure and Verify PPPoE Client
  • Implementing WAN Using Point-to-Point Protocols
  • Configure and Verify GRE Tunnel
  • Implementing GRE Tunnel
  • Configure and Verify Single Homed EBGP
  • Implementing Single-Homed EBGP
  • Configure External Authentication Using RADIUS and TACACS
  • Configure SNMP
  • Implementing Device Management and Security

Related Courses

 

Thinking about Onsite?

If you need training for 3 or more people, you should ask us about onsite training. Putting aside the obvious location benefit, content can be customised to better meet your business objectives and more can be covered than in a public classroom. It's a cost effective option.

Submit an enquiry from any page on this site, and let us know you are interested in the requirements box, or simply mention it when we contact you.

ITILv3, RESILIA, PRINCE2, PRINCE2 Agile, AgileSHIFT, MSP, M_o_R, P3M3, P3O, MoP, MoV courses on this page are offered by QA Affiliate of AXELOS Limited. ITIL, RESILIA, PRINCE2, PRINCE2 Agile, AgileSHIFT, MSP, M_o_R, P3M3, P3O,MoP, MoV are registered trademarks of AXELOS Limited. All rights reserved.

Upcoming Dates

  • GREEN This class is Guaranteed To Run.
  • SPVC - Self-Paced Virtual Class.
  • Click a Date to Enroll.
Course Location Days Cost Date
Virtual Virtual4 2737 £2737 2019-12-09
London London4 2737 £2737 2019-12-09
London London4 2737 £2737 2019-12-16
Virtual Virtual4 2737 £2737 2020-01-20
Virtual Virtual4 2737 £2737 2020-02-03
Virtual Virtual4 2737 £2737 2020-02-24
London London4 2737 £2737 2020-03-02
Hampshire Southampton4 2737 £2737 2020-03-02
Virtual Virtual4 2737 £2737 2020-03-02
Virtual Virtual4 2737 £2737 2020-03-30
Virtual Virtual4 2737 £2737 2020-04-20
Virtual Virtual4 2737 £2737 2020-04-27
Hampshire Southampton4 2737 £2737 2020-05-04
London London4 2737 £2737 2020-05-04
Virtual Virtual4 2737 £2737 2020-05-18